Icons; Battery Status/Battery Warning - Kenwood TK-2170 Series Function Reference

3.5

Icons

The LCD has the following icons.
Table 3-3 Icon List
Icons
• Priority Channel Icon
This icon represents a Priority Channel.
• Monitor Open Icon
This icon displays the status of the Mute
function and Signaling.
• Call Indicator Icon
This icon displays the status of Call
Indicator when the transceiver receives a
call from other users. The status of the
icon varies depending on the presence of
Trunking Zone Data.
If Trunking Zone Data is present:
LTR Call Indicator appears.
If there is no Trunking Zone Data:
DTMF/ 2-tone Call Indicator appears.
• Scan Mode Icon
This icon indicates the scan status. The
Scan Mode icon has 2 statuses.
Solid: The transceiver is scanning.
Blinking: The transceiver pauses scanning.
• Telephone ID Icon (TK-3173 only)
This icon indicates the status of Telephone
ID.
Solid: This icon indicates the Telephone ID
status.
Blinking: This icon indicates Auto
• Message Stack Icon
This icon indicates Message Stack status.
The Message Stack icon has 2 statuses.
Solid: All messages are already read.
Blinking: There is an unread message.
• Talk Around Icon
This icon appears if Talk Around is
enabled.
• Scrambler Icon
This icon appears if Scrambler is enabled.
• Low Transmit Power Icon
This icon appears if Low Transmit Power is
selected.
• Zone Add Icon
This icon appears if Zone Add is enabled.
(left)
• CH/GID Add Icon
This icon appears if CH/GID Add is
(right)
enabled.
• VOX Icon
This icon appears if VOX is enabled.
(left)
• AUX Icon
(middle) This icon appears if AUX is enabled.
• Operator Selectable Tone Icon
This icon appears if Operator Selectable
(right)
Tone is enabled.
FUNC (K)/Ver. 1.01
Function
Telephone Search status.
Icons
3.5.1 Battery Status/
Battery Warning
This function notifies a user of the remaining battery life
and warns of insufficient battery capacity.
When the Battery Status function is enabled, the battery
status is displayed in 4 stages according to the remaining
battery capacity.
If this function is enabled, the transceiver emits a beep or
displays a warning message if the battery voltage level
goes low.
Battery Status/ Battery Warning can be configured to be
enabled or disabled by using KPG-101D.
Table 3-4 Battery Status Icon List
Icons
Table 3-5 Battery Warning Operation
Battery Warning
Off
While Transmitting
Confidential
Function
• Battery Indicator Icon
This icon indicates the status of the
battery.
Status
High
Sufficient
Low
Very Low
Operation
The transceiver can transmit regardless of
the battery voltage and the battery
warning does not appear.
The transceiver monitors the battery
voltage level while transmitting. When the
battery voltage is lowered to the warning
voltage level, the LED blinks red and
Battery Warning Tone sounds while
transmitting.
Furthermore, the battery voltage is
lowered and the transceiver tries to
transmit below the transmission restricted
voltage level, the transmission is rejected.
The Transmission Restriction Tone also
sounds while the PTT switch is pressed.
Contents
3 DISPLAY
17
Index