Kenwood TK-2170 Series Function Reference page 113

20.7.10 Auto Reset Timer
Auto Reset Timer can be used to reset the LED, Alert
Tone, Monitor, and LCD to the previous statuses after a
certain period elapses.
The following functions can be configured for the Auto
Reset Timer.
Table 20-18 Auto Reset Timer Operation
Configuration
Off The Auto Reset Timer does not activate.
LED, Alert Tone, Monitor, and the LCD return to
1 to 300 s their previous statuses when configured time
elapses.
Table 20-19 Transceiver Operation after the
Auto Reset Timer expires
Item
The Selective Call Alert LED turns Off when the
LED
Auto Reset Timer expires.
The transceiver stops intermittently emitting the
Alert Tone
Alert Tone when the Auto Reset Timer expires.
The matching status of Selcall is reset when the
Monitor
Auto Reset Timer expires.
The previous CH/GID appears on the display
LCD
when the Auto Reset Timer expires.
Configuration using KPG-101D
• Configuring the Auto Reset Timer (Refer to FPRG
6.12.2 General 2 Tab - Auto Reset Timer.)
20.7.11 Alert Tone (Individual Call)
The Alert Tone (Individual Call) sounds when the
transceiver receives an individual call. One of 8 tones
configured in Special Alert Tone can be selected for the
Alert Tone (Individual Call).
Note: If Infinite is configured in the Special Alert Tone window >
Cycle edit box and the Auto Reset Timer (Alert) checkbox
is checked, the transceiver stops emitting this tone when the
Auto Reset Timer expires.
Configuration using KPG-101D
• Configuring the Alert Tone (Individual Call) (Refer
to FPRG 6.12.2 General 2 Tab - Individual Call
(Alert Tone).)
FUNC (K)/Ver. 1.01
Operation
Operation
Confidential
20.7.12 Alert Tone
(Other Selective Calls)
The Alert Tone (Other Selective Calls) sounds when the
transceiver receives a Selcall. One of 8 tones configured
in Special Alert Tone can be selected for the Alert Tone
(Other Selective Calls).
Note:
The Alert Tone (Other Selective Calls) is used for Group Call,
Fleet Call, Supervisor Call and Broadcast Call.
If Infinite is configured in the Special Alert Tone window >
Cycle edit box and the Auto Reset Timer (Alert) checkbox is
checked, the transceiver stops emitting this tone when the Auto
Reset Timer expires.
Configuration using KPG-101D
• Configuring the Alert Tone (Other Selective Calls)
(Refer to FPRG 6.12.2 General 2 Tab - Other
Selective Calls (Alert Tone).)
20.7.13 Alert Tone (Paging Call)
The Alert Tone (Paging Call) sounds when the
transceiver receives a paging call. One of 8 tones
configured in Special Alert Tone can be selected for the
Alert Tone (Paging Call).
Note: If Infinite is configured in the Special Alert Tone window >
Cycle edit box and the Auto Reset Timer (Alert) checkbox
is checked, the transceiver stops emitting this tone when the
Auto Reset Timer expires.
Configuration using KPG-101D
• Configuring the Alert Tone (Paging Call) (Refer to
FPRG 6.12.2 General 2 Tab - Paging Call (Alert
Tone).)
20.7.14 Alert Tone (Status Message
Call/ Short Message Call)
The Alert Tone (Status Message Call/ Short Message
Call) sounds when a Status Message or Short Message
is stacked. One of 8 tones configured in Special Alert
Tone can be selected for the Alert Tone (Status Message
Call/ Short Message Call).
Note: If Infinite is configured in the Special Alert Tone window >
Cycle edit box and the Auto Reset Timer (Alert) checkbox
is checked, the transceiver stops emitting this tone when the
Auto Reset Timer expires.
20 FLEETSYNC
101
Contents Index