Kenwood TK-2170 Series Function Reference page 47

Configuration using KPG-101D
• Configuring the Talk Around (Refer to FPRG
6.6.12 Talk Around.)
• Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
11.2.1 Talk Around Busy Channel
Lockout
This function automatically restricts the transmission
automatically not to interfere with other communications.
This function is convenient if the transceiver cannot
communicate with a repeater when the distance between
the transceiver and the repeater is too far away. If a user
transmits on a channel while other groups are using that
channel, the user may interfere with communications.
This function prevents such interference.
"BUSY" appears on the LCD even if the PTT switch is
pressed while this function is enabled. In this case, the
transceiver emits the Warning Tone and does not
transmit. The Warning Tone keeps sounding until the
PTT switch is released.
f1
f1
f2
Repeater
Figure 11-2 Talk Around Busy Channel Lockout
Talk Around Busy Channel Lockout can be configured to
be enabled or disabled by using KPG-101D.
Configuration using KPG-101D
• Configuring the Talk Around Busy Channel
Lockout (Refer to FPRG 6.3.17 Talk Around Busy
Channel Lockout.)
FUNC (K)/Ver. 1.01
The Channel
is Busy.
f1
f2
Talk Around Busy
Channel Lockout
Confidential
11.2.2 Talk Around Key
Talk Around key can be used to enable or disable the
Talk Around key operation in Trunking System.
This function can be used to prevent the Talk Around
function from being enabled unintentionally when the
Talk Around key is pressed when using the Talk Around
function only with default setting.
Talk Around key operation can be configured to be
enabled or disabled for each zone by using KPG-101D.
Configuration using KPG-101D
• Configuring the Talk Around Key (Refer to FPRG
6.3.18 Talk Around Key.)
11 TALK AROUND
Contents Index
35