Kenwood TK-2170 Series Function Reference page 92

19 2-TONE
Note:
The matching status of 2-tone is reset in the following conditions:
Table 19-6 Conditions for Resetting
2-tone Matching Status
Operation
If one of the following keys is pressed:
• Monitor key
• Monitor Momentary key
• Squelch Off key
• Squelch Off Momentary key
• Zone Up key
Pressing a • Zone Down key
key • Zone Up/Down key
• CH/GID Up key
• CH/GID Down key
• CH/GID Up/Down key
• Scan key
• Home CH/GID key
• Direct CH/GID 1 to Direct CH/GID 4 keys
Expiration of
When the Auto Reset Timer expires.
Timers
The status of Transpond is reset in the following conditions. The
transceiver does not transpond if the transmission is restricted
by Busy Channel Lockout.
Table 19-7 Conditions for Resetting Transpond
Operation
If one of the following keys is pressed:
• Monitor key
• Monitor Momentary key
• Squelch Off key
• Squelch Off Momentary key
• Zone Up key
Pressing a • Zone Down key
key • Zone Up/Down key
• CH/GID Up key
• CH/GID Down key
• CH/GID Up/Down key
• Scan key
• Home CH/GID key
• Direct CH/GID 1 to Direct CH/GID 4 keys
Transmission When the PTT switch is pressed to transmit.
Configuration using KPG-101D
• Configuring the Selective Call Alert LED (Refer to
FPRG 6.11.2 Decode Tab - Selective Call Alert
LED.)
80
Index Contents
Condition
Condition
Confidential FUNC (K)/Ver. 1.01