Key Assignment; Assigning Functions To The Selector; Assigning Functions To Pf Keys - Kenwood TK-2170 Series Function Reference

8 KEY ASSIGNMENT

Various functions can be assigned to the Selector and
PF keys.
Configuration using KPG-101D
• Assigning functions to the Selector and PF keys
(Refer to FPRG 6.8 Key Assignment.)
8.1 Assigning Functions to the
Selector
A function can be assigned to the Selector by using
KPG-101D.
Table 8-1 Assigning Functions to the Selector
Function Name
Transceiver does not respond. When
None the Selector is rotated, the Key-entry
Error Tone sounds.
When the Selector is rotated, the
CH/GID Up/Down CH/GID number is incremented or
decremented in steps of 1.
When the Selector is rotated, the Zone
Zone Up/Down number is incremented or decremented
in steps of 1.
8.2 Assigning Functions to
PF keys
A function can be assigned to the PF key by using KPG-
101D.
Table 8-2 Assigning Functions to PF Keys
Function Name
Transceiver does not respond. The
None transceiver emits the Key-entry Error
Tone when the None key is pressed.
The 2-tone code stored in the 2-tone
Encode List can be selected when the
2-tone key is pressed. The transceiver
2-tone
sends the 2-tone code when the PTT
switch or Side 2 key is pressed.
(Refer to 19 2-tone on page 76.)
The transceiver automatically connects
to the LTR System in order to
Auto Telephone communicate by using a telephone
(TK-3173 only) when the Auto Telephone key is
pressed.
Telephone Search on page 46.)
FUNC (K)/Ver. 1.01
Description
Description
(Refer to 15.1.14 Auto
Confidential
Function Name
When the Autodial key is pressed, a
user can select the DTMF code
configured in the DTMF Autodial List.
Autodial The transceiver sends the DTMF code
when the PTT switch or Side 2 key is
pressed.
63.)
When the Autodial Programming key
is pressed, the DTMF Autodial List can
Autodial
be configured, changed or cleared.
Programming
(Refer to 18.4.2 Autodial Programming
on page 73.)
When the AUX key is pressed, the AUX
1 Output terminal status can be
changed. The AUX 1 Output terminal
status is switched to Inactive when the
status is Active. On the other hand, the
AUX AUX 1 Output terminal status is
switched to Active when the status is
Inactive. An external device connected
to the AUX 1 port can be controlled
since the port output changes in
conjunction with the AUX key.
When one of the Call 1 to Call 2 keys is
pressed, the transceiver sends the
Call 1 or Call 2 assigned FleetSync Status, DTMF code
or 2-tone code.
on page 6.)
When the CH/GID Down key is pressed,
the CH/GID number decrements in
steps of 1.
The CH/GID is decremented in steps of
CH/GID Down
1 every 200 ms if the CH/GID Down key
is pressed or held for more than 1
second.
GID on page 9.)
When the CH/GID Up key is pressed,
the CH/GID number increments in steps
of 1.
The CH/GID is incremented in steps of 1
CH/GID Up
every 200 ms if the CH/GID Up key is
pressed or held for more than 1 second.
(Refer to 2.5 Changing the CH/GID on
page 9.)
When the Channel Entry key is
pressed, the channel number can be
Channel Entry
directly selected using the keypad.
(Refer to 2.6 Channel Entry on page 10.)
When one of the Direct CH/GID 1 to
Direct CH/GID 4 keys is pressed, the
Direct CH/GID 1 to
transceiver jumps to the configured CH/
Direct CH/GID 4
GID. (Refer to 2.8 Direct CH/GID on
page 11.)
When the Display Character key is
pressed, the CH/GID Name or Zone-CH/
Display Character GID Number appears on the display.
(Refer to 3.4.5 Display Character on
page 16.)
When the Emergency key is pressed,
the transceiver enters Emergency
Emergency
Mode. (Refer to 22 Emergency Mode on
page 114.)
Description
(Refer to 18 DTMF on page
(Refer to 1.11 Call Key
(Refer to 2.5 Changing the CH/
29
Contents Index