Kenwood TK-2170 Series Function Reference page 109

2. Press the [A] or [#] key.
"DELETE" appears on the display.
3. Press the [S] or [*] key.
The message is deleted.
The Stack List display appears without deleting
the message when the [A] or [#] key is
pressed.
Deleting All Messages
1. Press and hold the [A] or [#] key for 1 second.
"ALL DEL" appears on the display.
2. Press the [S] or [*] key.
All messages are deleted and "EMPTY"
appears on the display.
The Stack List display appears without deleting
the message when the [A] or [#] key is
pressed.
FUNC (K)/Ver. 1.01
20.6.1 Stores the Latest Received
Messages
This function can be used to configure the method for
storing the Caller IDs, Status Messages and Short
Messages.
Stores the Latest Received Messages can be configured
by using KPG-101D.
Table 20-13 Stores the Latest Received Messages
Stores the Latest
Received Messages
Check (Enable)
Uncheck (Disable)
Note: The transceiver can store a maximum of 3 Caller IDs, 5
Status Messages and 1 Short Message in total of 9
Messages. The number of messages that can be stored in
the memory varies if the memory is not full.
Configuration using KPG-101D
• Configuring the Stores the latest received
messages (Refer to FPRG 6.12.2 General 2 Tab -
Stores the latest received messages.)
Confidential
20 FLEETSYNC
Configuration
Function
The transceiver stacks a maximum of 9
received messages in the order
received. When the transceiver
receives a message while the memory is
full, the transceiver deletes the oldest
message from the stack memory and
stores the latest message.
The transceiver stacks a maximum of 9
received messages in the order
received. When the transceiver
receives a message while the memory is
full, the transceiver does not store the
message.
Contents Index
97