Battery Saver; Mode Reset Timer - Kenwood TK-2170 Series Function Reference

Hide thumbs Also See for TK-2170 Series:
Table of Contents

Advertisement

1.13 Battery Saver

Battery Saver turns Off the receiver circuits periodically to
reduce battery consumption.
The transceiver receives intermittently in the following
conditions:
While no carrier is detected.
If no key is pressed for more than 5 seconds while a
carrier is detected and the QT/DQT does not match.
A user may have a chance to miss a call when the
transceiver receives a call while Battery Saver is enabled.
To avoid this, the transmitting party must be delayed to
talk or sending data after the transceiver starts
transmitting.
Battery Saver can be configured by using KPG-101D.
Following are the duration of intermittent reception.
Table 1-9 Intermittent Reception Intervals
QT/DQT or
Battery Saver
Optional Signaling
Not Configured
Off
Off
On
800 ms
800 or 200 ms
Off
Figure 1-5 Battery Saver
Configuration using KPG-101D
Configuring the Battery Saver (Refer to FPRG
6.7.2 Common Page 2 Tab - Battery Saver.)
FUNC (K)/Ver. 1.01
QT/DQT or
Optional Signaling
Configured
Off
200 ms
Saver On
Off

1.14 Mode Reset Timer

Mode Reset Timer is used to exit from Special Mode or
reset other statuses.
There are several Special Modes in the transceiver.
When the transceiver enters Special Mode, the current
Special Mode display appears on the display.
Key functions configured in Key Assignment cannot be
used since the following keys are fixed.
[S] Key
[A] Key
[<B] Key
[C>] Key
Side 1 Key
Side 2 Key
Selector
12-key keypad
(TK-2170 K2/ TK-3170 K4/ TK-3170 K6 only)
With the Mode Reset Timer, the transceiver can
automatically and reliably exit from Special Mode.
The Mode Reset Timer is used for the following Special
Modes and other statuses.
Table 1-10 Available Special Modes for
2-tone Encode List Select Mode
Squelch Level Adjustment Mode
Note: "PASSWORD" appears on the display when the Mode
Reset Timer expires in Transceiver Password Mode.
Configuration using KPG-101D
Configuring the Mode Reset Timer (Refer to
FPRG 6.7.1 Common Page 1 Tab - Mode Reset
Timer.)
Confidential
1 BASIC FUNCTIONS
Mode Reset Timer
Autodial Mode
Autodial Programming Mode
Channel Entry Mode
OST List Select Mode
Transceiver Password Mode
Scrambler Code Select Mode
Selcall Mode
Stack Mode
Status Mode
VOX Level Adjustment Mode
Contents
7
Index

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents