Kenwood TK-2170 Series Function Reference page 120

21 SCAN
21.1.7 Single Scan
Single Scan can be used to only scan the zone in which
the transceiver started scanning.
The following CH/GIDs can be scanned:
• CH/GID on which Scan Add is enabled in the Channel
Edit window or GID Edit window.
• A CH/GID added to the Scan List with the Scan
Delete/Add key
The transceiver always scans Priority Channel even if the
Priority Channel is not configured in the target zone when
a Priority Channel is configured.
"Single" must be selected from the Scan Type dropdown
list to enable Single Scan.
Transceiver Operation
Starting the Scan
1. Press the Scan key.
The transceiver starts scanning.
• Normal Scan
"SCAN" and the "
display.
• If the transceiver enters Scan Termination
Condition during the scan:
The transceiver pauses scanning. The
" " icon blinks.
Exiting from Scan Mode
1. Press the Scan key while the transceiver is
scanning.
The " " icon disappears and the transceiver
finishes scanning.
108
Index Contents
" icon appear on the
Confidential
Configuration using KPG-101D
• Configuring the Scan Type (Refer to FPRG 6.9.8
Scan Type.)
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
21.2 Multi Scan
Multi Scan can be used to scan all zones and CH/GID.
The following Zone-CH/GIDs can be scanned with Multi
Scan:
• A Zone that Zone Add has selected by using
KPG-101D
• A CH/GID that Scan Add has selected by using KPG-
101D
• A CH/GID added to the Scan List with the Scan
Delete/Add key
The transceiver always scans Priority Channel even if the
Priority Channel is not configured in the target zone when
a Priority Channel is configured.
"Multi" must be selected from the Scan Type to enable
Multi Scan.
Transceiver Operation
Starting the Scan
1. Press the Scan key.
The transceiver starts scanning.
"SCAN" and the "
display.
Exiting from Scan Mode
1. Press the Scan key while the transceiver is
scanning.
The " " icon disappears and the transceiver
finishes scanning.
Configuration using KPG-101D
• Configuring the Scan Type (Refer to FPRG 6.9.8
Scan Type.)
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
" icon appear on the
FUNC (K)/Ver. 1.01