Configuring Dns; Table 129 Remote Management: Snmp - ZyXEL Communications P-2602H User Manual

Chapter 23 Remote Management Configuration
The following table describes the labels in this screen.

Table 129 Remote Management: SNMP

LABEL
SNMP
Port
Access Status
Secured Client IP
SNMP Configuration
Get Community
Set Community
Trap
Community
Destination
Apply
Cancel

23.7 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to
To change your ZyXEL Device's DNS settings, click Advanced > Remote MGMT > DNS.
The screen appears as shown. Use this screen to set from which IP address the ZyXEL Device
will accept DNS queries and on which interface it can send them your ZyXEL Device's DNS
settings.
310
DESCRIPTION
You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Enter the Get Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is public and
allows all requests.
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
Chapter 8 on page 105 for background information.
P-2602H(W)(L)-DxA User's Guide