Table 168 Voice Features - ZyXEL Communications P-2602H User Manual

Appendix A Product Specifications
Not all features are supported by all service providers. Consult your service
provider for more information.

Table 168 Voice Features

Call Fallback
Call Park and
Pickup
Call Return
Country Code
Distinctive Ringing
Do not Disturb
(DnD)
Auto Dial
Music on hold
Phone config
Internal call
HTTP pincode
376
Call fallback allows you to set the ZyXEL Device to automatically use the PSTN
connection for outgoing calls if the SIP account is not working, or to use the SIP
account for outgoing calls if the PSTN port is unplugged or not working.
Call park and pickup lets you put a call on hold (park) and then continue the call
(pickup). You can continue the call on the same phone, or another phone
connected to the ZyXEL Device. The caller must still pay while the call is
parked.
When you park the call, you enter a number of your choice (up to eight digits),
which you must enter again when you pick up the call. If you do not enter the
correct number, you cannot pickup the call. This means that only someone who
knows the number you have chosen can pick up the call.
You can have more than one call on hold at the same time, but you must give
each call a different number.
With call return, you can place a call to the last number that called you (either
answered or missed). The last incoming call can be through either SIP or
PSTN.
Phone standards and settings differ from one country to another, so the settings
on your ZyXEL Device must be configured to match those of the country you
are in. The country code feature allows you to do this by selecting the country
from a list rather than changing each setting manually. Configure the country
code feature when you move the ZyXEL Device from one country to another.
With the distinctive ring feature, you can assign different ringing tones to
different incoming calls, based either on the number that calls you or from
where the call originates (SIP, PSTN or internal). Use this feature to let you
know where a call comes from before you answer it.
This feature allows you to set your phone not to ring when someone calls you.
You can set each phone independently using its keypad, or configure global
settings for all phones using the command line interpreter.
You can set the ZyXEL Device to automatically dial a specified number
immediately whenever you lift a phone off the hook. Use the Web Configurator
to set the specified number. Use the command line interpreter to have the
ZyXEL Device wait a specified length of time before dialing the number.
This feature allows you to put a call on hold and have the other person hear a
piece of audio (music, speech, etc.) you previously recorded.
The phone config table allows you to customize the phone keypad
combinations you use to access certain features on the ZyXEL Device, such as
call waiting, call return, call forward, etc. The phone config table is configurable
in command interpreter mode.
When you have phones attached to both of the ZyXEL Device's phone ports,
you can dial "####" to place a call to the phone(s) connected to the other port.
If your service provider uses an auto provisioning server, you need to enter a
personal identification number (supplied by your service provider) before you
first use the feature.
P-2602H(W)(L)-DxA User's Guide