Bandwidth Monitor; Figure 173 Bandwidth Management: Monitor - ZyXEL Communications P-2602H User Manual

Table 123 Bandwidth Management Rule Configuration (continued)
LABEL
Source Port
Protocol
Back
Apply
Cancel

21.8 Bandwidth Monitor

To view the ZyXEL Device's bandwidth usage, click Advanced > Bandwidth MGMT >
Monitor. The screen appears as shown. Select an interface from the drop-down list box to
view the bandwidth usage of its bandwidth rules. The gray section of the bar represents the
percentage of unused bandwidth and the blue color represents the percentage of bandwidth in
use.

Figure 173 Bandwidth Management: Monitor

P-2602H(W)(L)-DxA User's Guide
DESCRIPTION
Enter the port number of the source. See
common services and port numbers.
Select the protocol (TCP or UDP) or select User defined and enter the protocol
(service type) number. 0 means any protocol number.
Click Back to go to the previous screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 21 Bandwidth Management
Appendix F on page 417 for some
297