Figure 252 Displaying Log Categories Example; Figure 253 Displaying Log Parameters Example; Displaying Logs - ZyXEL Communications P-2602H User Manual

Appendix G Command Interpreter
Configuring What You Want the ZyXEL Device to Log
1 Use the
configure which logs the ZyXEL Device is to record.
2 Use

Figure 252 Displaying Log Categories Example

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
wlan
radius
ras>
3 Use
available for the category.

Figure 253 Displaying Log Parameters Example

ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both]
ras>
4 Use
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to
record only alerts for that category, and 3 to record both logs and alerts for that category.
Not every parameter is available with every category.
5 Use the
must do this in order to record logs).

Displaying Logs

• Use the
log.
• Use the
log categories.
• Use the
individual log category.
• Use the
422
command to load the log setting buffer that allows you to
sys logs load
to view a list of the log categories.
sys logs category
exit
ip
8021x
followed by a log category to display the parameters that are
sys logs category
followed by a log category and a parameter to decide what to
sys logs category
command to store the settings in the ZyXEL Device (you
sys logs save
command to show all of the logs in the ZyXEL Device's
sys logs display
sys logs category
sys logs display [log category]
command to erase all of the ZyXEL Device's logs.
sys logs clear
ether wan
bridge lan
dsp voiceradius
display command to show the log settings for all of the
command to show the logs in an
P-2602H(W)(L)-DxA User's Guide
8021x