Configuring Telnet; Configuring Ftp; Figure 178 Remote Management: Telnet; Table 126 Remote Management: Telnet - ZyXEL Communications P-2602H User Manual

Chapter 23 Remote Management Configuration

23.4 Configuring Telnet

Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.

Figure 178 Remote Management: Telnet

The following table describes the labels in this screen.

Table 126 Remote Management: Telnet

LABEL
Port
Access Status
Secured Client
IP
Apply
Cancel

23.5 Configuring FTP

You can upload and download the ZyXEL Device's firmware and configuration files using
FTP. Please see
have an FTP client.
To change your ZyXEL Device's FTP settings, click Advanced > Remote MGMT > FTP
tab. The screen appears as shown.
306
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
Section 27.7 on page 351 for details. To use this feature, your computer must
P-2602H(W)(L)-DxA User's Guide