Installing Upnp In Windows Example; Figure 185 Add/Remove Programs: Windows Setup: Communication - ZyXEL Communications P-2602H User Manual

Table 132 Configuring UPnP
LABEL
Allow UPnP to pass through
Firewall
Apply
Cancel

24.3 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
2 Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.

Figure 185 Add/Remove Programs: Windows Setup: Communication

3 In the Communications window, select the Universal Plug and Play check box in the
Components selection box.
P-2602H(W)(L)-DxA User's Guide
Chapter 24 Universal Plug-and-Play (UPnP)
DESCRIPTION
Select this check box to allow traffic from UPnP-enabled applications to
bypass the firewall.
Clear this check box to have the firewall block all UPnP application
packets (for example, MSN packets).
Click Apply to save the setting to the ZyXEL Device.
Click Cancel to return to the previously saved settings.
315