Telnet; Figure 176 Remote Management: Www; Figure 177 Telnet Configuration On A Tcp/Ip Network; Table 125 Remote Management: Www - ZyXEL Communications P-2602H User Manual

Figure 176 Remote Management: WWW

The following table describes the labels in this screen.

Table 125 Remote Management: WWW

LABEL
Port
Access Status
Secured Client IP A secured client is a "trusted" computer that is allowed to communicate with the
Apply
Cancel

23.3 Telnet

You can configure your ZyXEL Device for remote Telnet access as shown next. The
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Figure 177 Telnet Configuration on a TCP/IP Network

P-2602H(W)(L)-DxA User's Guide
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your settings back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 23 Remote Management Configuration
305