Appendix G Command Interpreter; Command Syntax; Command Usage; Log Commands - ZyXEL Communications P-2602H User Manual

A
P P E N D I X
The following describes how to use the command interpreter. Telnet to the ZyXEL Device and
enter the password to use the commands. See the included disk or zyxel.com for more detailed
information on these commands.
Use of undocumented commands or misconfiguration can damage the unit
and possibly render it unusable.

Command Syntax

• The command keywords are in courier new font.
• Enter the command keywords exactly as shown, do not abbreviate.
• The required fields in a command are enclosed in angle brackets <>.
• The optional fields in a command are enclosed in square brackets [].
• The |symbol means or.
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.

Command Usage

A list of valid commands can be found by typing help or ? at the command prompt. Always
type the full command. Type exit to leave the commands when finished.

Log Commands

This section provides some general examples of how to use the log commands. The items that
dispay with your device may vary but the basic function should be the same.
P-2602H(W)(L)-DxA User's Guide
Command Interpreter
G
421