Directory Server Add And Edit; Figure 164 Directory Servers; Table 113 Directory Servers - ZyXEL Communications P-2602H User Manual

Figure 164 Directory Servers

The following table describes the labels in this screen.

Table 113 Directory Servers

LABEL
PKI Storage
Space in Use
#
Name
Address
Port
Protocol
Modify
Add

19.16 Directory Server Add and Edit

Click Security > Certificates > Directory Servers to open the Directory Servers screen.
Click Add (or the details icon) to open the Directory Server Add screen. Use this screen to
configure information about a directory server that the ZyXEL Device can access.
P-2602H(W)(L)-DxA User's Guide
DESCRIPTION
This bar displays the percentage of the ZyXEL Device's PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
The index number of the directory server. The servers are listed in alphabetical
order.
This field displays the name used to identify this directory server.
This field displays the IP address or domain name of the directory server.
This field displays the port number that the directory server uses.
This field displays the protocol that the directory server uses.
Click the details icon to open a screen where you can change the information
about the directory server.
Click the delete icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Click Add to open a screen where you can configure information about a directory
server so that the ZyXEL Device can access it.
Chapter 19 Certificates
285