Static Route; Chapter 20 Static Route; Configuring Static Route; Figure 166 Example Of Static Routing Topology - ZyXEL Communications P-2602H User Manual

C
H A P T E R
This chapter shows you how to configure static routes for your ZyXEL Device.

20.1 Static Route

Each remote node specifies only the network to which the gateway is directly connected, and
the ZyXEL Device has no knowledge of the networks beyond. For instance, the ZyXEL
Device knows about network N2 in the following figure through remote node Router 1.
However, the ZyXEL Device is unable to route a packet to network N3 because it doesn't
know that there is a route through the same remote node Router 1 (via gateway Router 2). The
static routes are for you to tell the ZyXEL Device about the networks beyond the remote
nodes.

Figure 166 Example of Static Routing Topology

20.2 Configuring Static Route

Click Advanced > Static Route to open the Static Route screen.
P-2602H(W)(L)-DxA User's Guide
20

Static Route

287