Connecting To A Network; Configuring The Zyair Wireless Parameters; Figure 3-9 Site Survey Warning; Table 3-6 Color Indicator For Link Quality/Link Strength - ZyXEL Communications ZyAir B-220 User Manual

ZyAIR Wireless LAN Utility
FIELD
Connect Click Connect to associate to the selected wireless device.
The following table describes the colors used for the entries in the Site Survey screen.

Table 3-6 Color Indicator for Link Quality/Link Strength

COLOR
Green
Blue
Red

3.7.1 Connecting to a Network

Follow the steps below to connect to a network.
Step 1. Click Search to scan for all available wireless networks within range.
Step 2. To join a network, either click an entry in the table to select a wireless network and then click
Connect or double-click an entry.
Step 3. If the WEP field is Enable for the selected wireless network, the following screen displays.
Step 4.
Click OK to display the Security screen and refer to Section 4.2 to set up WEP keys. Otherwise
click Cancel and connect to another wireless network without WEP encryption.
Step 5. To verify that you have successfully connected to the selected network, check the network
information in the Link Info screen.
3.8

Configuring the ZyAIR Wireless Parameters

Click Configuration in the ZyAIR Utility program to display the Configuration screen as shown next.
3-10
Table 3-5 ZyAIR Utility: Site Survey
Excellent link quality or link strength.
Good link quality or link strength.
Poor link quality or link strength.

Figure 3-9 Site Survey Warning

DESCRIPTION
DESCRIPTION
Using the ZyAIR Utility