Connections
2-3-6 Disconnecting from the light curtain and PC
Step 1: Turn OFF the light curtain power.
Step 2: Disconnect the connection cable of the device from the connector inside the light curtain.
Step 3: Disconnect the USB cable from the device or the PC.
Step 4: All indicators on the device turn OFF.
Step 5: Attach the indicator cover to the light curtain.
Tighten to a torque of 0.3N·m or less.
Packing is fitted on the indicator cover. If the packing is not fitted on the connector properly, fit as
shown below before connecting to the device.
20
CAUTION
© Panasonic Industrial Devices SUNX Co., Ltd. 2020