Input / Output Wire Settings - Panasonic SF4D-TM1 User Manual

Functions

5-1 Input / output wire settings

You can automatically assign input / output settings and specific input / output functions based
on the cable used for the light curtain (12-core cable, 8-core cable, 5-core cable).
"Line synchronization" or "optical synchronization" can be selected for the synchronization
method.
● If you will use this device with "optical synchronization", make sure that either DIP switch 1 (fre-
quency A) or DIP switch 2 (frequency B) of the light curtain is ON.
● If you will use this device with "optical synchronization", isolate the synchronization + wire (or-
ange) and the synchronization – wire (orange / black) of the light curtain emitter and receiver. If
the synchronization wires of the light curtain emitter and receiver are connected, communication
between the device and the light curtain will not be possible.
Selecting the synchronization method for the combination of cable and input / output
specifications used
Cable used
Standard specification
Parallel interference prevention specification
12-core cable Optical synchronization / standard specification
Optical synchronization / muting specification / PNP output
Optical synchronization / muting specification / NPN output
8-core cable Standard specification
Optical synchronization / standard specification
Optical synchronization / application indicator-based speci-
5-core cable fication / PNP output
Optical synchronization / application indicator-based speci-
fication / NPN output
54
Input / output specifications (cable functions)
CAUTION
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
Synchronization method
Line synchronization
Line synchronization
Optical synchronization
Optical synchronization
Optical synchronization
Line synchronization
Optical synchronization
Optical synchronization
Optical synchronization