Panasonic SF4D-TM1 User Manual page 67

● Wiring example: Optical synchronization / muting specification / PNP output (12-core
cable)
Gray cable
Gray cable
(with black line)
*Symbols
Switch S1
● Test / reset input (emitter)
Vs to Vs-2.5V (sink current 5mA or less): Emission halt (Note), Open: Emission
Switch S2
● Test / reset input (receiver), application indicator input 1 / 2, muting input A / B
Vs to Vs-2.5V (sink current 5mA or less): Valid (Note), Open: Invalid
Switch S3
● Override input
Vs to Vs-2.5V (sink current 5mA or less): Invalid (Note), Open: Valid
K1, K2: External device (forcible guide relay or magnetic conductor), etc.
Note: Vs is the supply voltage.
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
(Pale purple) NC
(Red / White) NC
(Yellow) NC
(Red) Auxiliary output 1
(Pale blue) NC
(Orange) NC
(Orange / Black) NC
(Brown) + V
(Pink) Test / Reset input
(Gray) Application indicator input 1
(Gray / Black) Application indicator input 2
(Blue) 0V
(Brown) + V
(Pale purple) External
device monitor input
(Pale blue) Test / Reset input
(Pink) Muting input A
(Yellow) Muting input B
(Gray) Override input
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Blue) 0V
(Orange) NC
(Orange / Black) NC
(Red) Auxiliary output 2
*S1
*S2
K1 K2
Functions
*S2
+
-
*S2
*S2
*S3
+
-
K1
K2
24V DC
+20
%
-30
24V DC
+20
%
-30
67