Initialization Function - Panasonic SF4D-TM1 User Manual

Functions

5-11 Initialization function

The light curtain settings can be returned to the factory state. (Note)
The factory setting of each function is shown in the table below.
Input / output wire
Muting function
Blanking function
Interlock /
External device monitor
function
Application indicator
function
Note: When a password is set for the light curtain, the password must be entered to initialize the settings.
● When the light curtain is used with "line synchronization", you can configure overall settings by
connecting the device to either the emitter or the receiver of the light curtain.
● When the light curtain is used with "optical synchronization", you can configure the settings of
the emitter or the receiver of the light curtain to which the device is connected. To change over-
all settings, you must change both the settings of the emitter and the settings of the receiver.
88
Function
Cable function
Auxiliary output function assignment
Muting mode
Input order
Muting sensor output operation setting
Muting indicator wire breakage detection
Override setting
Override continuous time
Individual beam axis setting
Fixed blanking function
Floating blanking function
Interlock selection
Interlock mode
External device monitor (EDM)
Allowed delay time
Assignment selection
State
Color selection
Pattern selection
CAUTION
12-core cable, standard specification
Application indicator input
Application indicator input 1 / 2
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
Setting
OSSD negative logic
Parallel 4-sensor
A = B
NO / NO
Invalid
Valid
60 sec.
All beam axes valid
Invalid
Invalid
Cable selection
Start / Restart interlock
Valid
300ms
Green / Red
ON / ON