Panasonic SF4D-TM1 User Manual page 64

Functions
● Wiring example: Optical synchronization / standard specification (12-core cable)
<Using PNP output>
Gray cable
Gray cable
(with black line)
*Symbols
Switch S1
● Test / reset input (emitter)
Vs to Vs-2.5V (sink current 5mA or less): Emission halt (Note), Open: Emission
Switch S2
● Test / reset input (receiver), application indicator input 1 / 2, interlock setting input
Vs to Vs-2.5V (sink current 5mA or less): Valid (Note), Open: Invalid
K1, K2: External device (forcible guide relay or magnetic conductor), etc.
Note: Vs is the supply voltage.
64
(Pale Purple) NC
(Red / White) NC
(Yellow) NC
(Red) Auxiliary output 1
(Orange) NC
(Orange / Black) NC
(Brown) + V
(Pink) Test / Reset input
(Gray) Application indicator input 1
(Gray / Black) Application indicator input 2
(Pale blue) Output polarity setting / Lockout release input
(Blue) 0V
(Brown) + V
(Pale purple) External device monitor input
(Pink) Test / Reset input
(Yellow) Interlock setting input
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Pale blue) Output polarity setting / Lockout release input
(Blue) 0V
(Orange) NC
(Orange / Black) NC
(Red) Auxiliary output 2
(Gray) NC
*S1
K1 K2
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
*S2
+
24V DC
+20
%
-
-30
*S2
*S2
+
24V DC
+20
%
K1 -
-30
K2