Connections
2-3-2 Disconnecting from the light curtain
Step 1: Turn OFF the light curtain power.
Step 2: All indicators on the device turn OFF.
Step 3: Disconnect the connection cable of the device from the connector inside the light cur-
tain.
Step 4: Attach the indicator cover to the light curtain.
Tighten to a torque of 0.3N·m or less.
Packing is fitted on the indicator cover. If the packing is not fitted properly, fit as shown below be-
fore attaching to the device.
16
CAUTION
© Panasonic Industrial Devices SUNX Co., Ltd. 2020