Pnp Output (5-Core Cable); Optical Synchronization / Application Indicator Based Specification / Pnp Output (5-Core Cable) - Panasonic SF4D-TM1 User Manual

5-2-8 Optical synchronization / application indicator based specification /

PNP output (5-core cable)

Optical synchronization / application indicator based specification / PNP output (5-core cable)

can be used with optical synchronization.
An application indicator input can be incorporated to light the application indicator of the light
curtain.
There is no auxiliary output on the light curtain.
The input / output polarity is fixed at PNP output. Polarity setting by output polarity setting / lock-
out release input is invalid.
When set to optical synchronization / application indicator based specification / PNP output (5-
core cable), the following functions of the input / output wires change.
Terminal
No.
Emitter
Receiver
● Wiring example: Optical synchronization / application indicator based specification /
PNP output (5-core cable)
Gray cable
Gray cable
(with black line)
*Symbols
Switch S1
● Test input
Vs to Vs-2.5V (sink current 5mA or less): Emission halt (Note), Open: Emission
Switch S2
● Application indicator input 1
Vs to Vs-2.5V (sink current 5mA or less): Valid (Note), Open: Invalid
K1, K2: Safety relay unit, etc.
Note: Vs is the supply voltage.
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
Lead wire When "Standard specification" is
color selected
5 Pale blue
5 Pale blue
(Brown) + V
(Pink) Test input
(Pale blue) Application indicator input 1
(Blue) 0V
(Brown) + V
(Pale blue) Application indicator input 1
(Black) Control output 1 (OSSD 1)
(White) Control output 2 (OSSD 2)
(Blue) 0V
Output polarity setting / lockout
release input
Output polarity setting / lockout
release input
Functions
When "optical synchronization / appli-
cation indicator oriented specification /
PNP output (5-core cable)" is selected
Application indicator input 1
Application indicator input 1
*S1
+
*S2
-
*S2
+
K1
-
K2
24V DC
+20
%
-30
24V DC
+20
%
-30
73