Editing A Send/Return Effect Patch - Zoom MRS-1044 Operation Manual

Using the send/return effects
H
INT
• When a reverb or chorus/delay patch is selected, you
can press the corresponding key ([REVERB] or
[CHORUS/DELAY]) to switch that effect on/off. (When off,
the key will be dark.)
• For details on track mixer operations, refer to p.49.
3.
To return to the main screen, press the [EXIT] key.

Editing a send/return effect patch

Here's how to edit a reverb or chorus/delay patch.
1.
Press the [EFFECT] key, and then press the
[REVERB] key or [CHORUS/DELAY] key.
Press the [REVERB] key to edit a reverb patch, or press the
[CHORUS/DELAY] key to edit a chorus/delay patch.
When either key is pressed, the currently selected patch
will be displayed. The following screen is an example of
what you see when the [CHORUS/DELAY] key is pressed.
Patch name Patch number
2.
If necessary, turn the dial to select the patch that
you want to edit.
3.
Press the [EDIT] key.
The display will indicate "EDIT," and a screen will appear
in which you can edit the patch. When the [EDIT] key is
first pressed, a screen will appear in which you can select
the effect type of the selected send/return effect (in this
example, chorus/delay).
Effect type
82
4.
If you want to change the effect type, turn the dial.
In this example, the chorus/delay effect type has been
changed from "CHORUS" to "DELAY." When the effect
type is changed, the effect parameters will also be different.
H
INT
When the contents of a patch are modified, the "EDIT"
indicator in the upper part of the display will change to
"EDITED."
Q W
5.
Use the cursor [ ]/[
parameter that you want to edit.
In this example, the TIME parameter of the "DELAY"
effect type has been selected.
Effect parameter
6.
Turn the dial to change the setting.
For details on the effect types that can be selected for
reverb or chorus/delay, and on the range of each effect
parameter, refer to the appendix ( → p.105) at the end of
this manual.
7.
As necessary, repeat steps 5 – 6 to edit other effect
parameters.
8. When you have finished editing, press the [EXIT]
key.
You will return to the patch select screen.
N
OTE
Be aware that if you return to the patch select screen and
select another patch, your edits will be lost. If you want to
keep the edited patch, refer to the following section.
] keys to select the effect
Setting
ZOOM MRS-1044