Importing Rhythm Patterns And The Rhythm Song From Another Project; Editing Various Settings Of The Rhythm Section; Basic Procedure - Zoom MRS-1044 Operation Manual

Importing rhythm patterns and the rhythm song from another project

Importing rhythm patterns and
the rhythm song from another
project
Here's how you can import (load) the rhythm pattern data
(255 patterns) and rhythm song data from another project
that was saved on the hard disk.
1.
In the main screen, press the [RHYTHM] key, and
then press the [PROJECT/UTILITY] key.
A screen will appear in which you can make various
settings for the rhythm section. (This screen is called the
"rhythm utility menu.") This operation can be performed
whether the rhythm section is in Rhythm Pattern mode or
in Rhythm Song mode.
E R
2.
Use the cursor [ ]/[
read "UTILITY IMPORT," and press the [ENTER]
key.
A screen will appear in which you can select the project to
be imported.
Import-source project name Project number
3. Turn the dial to select a project, and press the
[ENTER] key.
The display will ask "SURE?"
4.
Press the [ENTER] key to import, or press the
[EXIT] key to cancel.
After the data has been imported, you will return to the
rhythm utility menu. To return to the main screen, press the
[EXIT] key several times.
N
OTE
The rhythm patterns and rhythm song that are imported will
overwrite the rhythm patterns and rhythm song of the
project that you are currently operating.
72
] keys to make the display
Editing various settings of the
rhythm section
Here's how you can edit various settings that affect the
entire rhythm section, such as adjusting the sensitivity of
pads 1 – 8 or adjusting the volume of the metronome.

Basic procedure

The basic procedure for editing the rhythm section settings
is the same for most items. Here's the basic procedure.
H
INT
You can use the same procedure in either Rhythm pattern
mode or Rhythm Song mode.
1.
In the main screen, press the [RHYTHM] key.
The [RHYTHM] key will light, and either the rhythm
pattern screen or the rhythm song screen will appear,
depending on the currently selected mode.
2.
Press the [PROJECT/UTILITY] key.
The rhythm utility menu will appear, where you can make
various settings for the rhythm section.
E R
3. Use the cursor [ ]/[
following items to edit, and press the [ENTER] key.
• COUNT: Change the length of the pre-count.
• CLICK: Change the volume of the metronome.
• PAD SENS (sensitivity): Specify how the volume will be
affected by the force with which a pad is struck.
• MIDI: Make MIDI-related settings ( → p.90).
• IMPORT: Import rhythm patterns and the rhythm song
from a project saved on the hard disk.
• MEMORY (memory remaining): Check the remaining
amount of rhythm pattern and rhythm song memory.
4.
Turn the dial to edit the setting.
The screen display and operation will be different for each
item. For details refer to the sections that follow.
H
INT
For details on MIDI operations, refer to page 90. For details
on the Import procedure, refer to the preceding section.
] keys to select one of the
ZOOM MRS-1044