Connections - Zoom MRS-1044 Operation Manual

Connections

Connect your instruments, audio devices, and MIDI devices as shown in the following diagram.
N
OTE
To prevent damage to the speakers of your audio
system, tur n off the power of the audio system
connected to the [OUTPUT] (MASTER) jacks (or turn the
volume all the way down) before you make connections.
MIDI sequencer
(e.g., computer)
MIDI IN
AC adaptor
H
INT
Loop the cable of the AC adaptor around the hook as
shown in the diagram before connecting it to the [DC 12V]
jack. This will prevent the plug from being pulled out if the
AC adaptor cable is accidentally pulled.
14
Digital recorder
(e.g., DAT recorder or
MD recorder)
MIDI interface
MIDI OUT
Foot switch
(ZOOM FS01)
Expression pedal
(ZOOM FP01/FP02)
Bass Guitar
Audio system
(audio components or
amplified speakers)
Headphones
R
Synthesizer or sampler, etc.
H
INT
When connecting stereo output devices such as a
synthesizer or CD player, connect the L output of
the external device to the [INPUT 1] jack, and the
R output to the [INPUT 2] jack.
Dynamic
or condenser mics
R L
CD player, etc.
L
ZOOM MRS-1044