Editing The Insert Effect Patch - Zoom MRS-1044 Operation Manual

Using the insert effect
• When recording on one mono track (track 1 – 6)
INPUT 1
EFFECT
or
( M → S )
INPUT 2
EFFECT
INPUT 1
( S → S )
or
INPUT 2
INPUT 1
EFFECT
( M → S )
INPUT 2
INPUT 1
EFFECT
( S → S )
INPUT 2
H
INT
If no recording track is selected, the output signal of the
insert effect will be sent to a location immediately before
the MASTER fader, and mixed with the signals of the track
mixer.
78
I When inserted into the track mixer
• If two mono channels (channels 1/2, 3/4, 5/6), a stereo
channel (7/8, 9/10), or the DRUM channel is selected as
Recorder
Track the insert location
Recorder
Recorder
Track
Track
Track
Recorder
Recorder
Track
Track
Track
• If a mono channel (channel 1 – 6) or the BASS channel
Recorder
is selected as the insert location
Track
Recorder
Track
Recorder
Track
I When inserted immediately before the MASTER
fader
L
R
L
R

Editing the insert effect patch

The effect modules of the insert effect have various "effect
parameters" that can be adjusted to make detailed changes
to the character of the effect. By editing the effect
parameters, you can obtain the desired tone or effect.
For some effect modules, you can change the "effect type."
For example in the GUITAR/BASS algorithm, the
MODULATION/DELAY effect module provides twelve
effect types such as chorus, flanger, and phaser, and you
can select and use any one of these. When you change the
effect type, the effect parameters will also change.
Track mixer
Channel
EFFECT
( M → S )
Channel
Track mixer
Channel
EFFECT
( S → S )
Channel
Track mixer
EFFECT
Channel
( M → S )
Track mixer
EFFECT
Channel
( S → S )
MASTER fade
EFFECT
( M → S )
EFFECT
( S → S )
ZOOM MRS-1044
OUTPUT
L
R
L
R