Zoom MRS-1044 Operation Manual page 104

Effect type/parameter list
NORMALIZE MODULE
TYPE
NORMLZR
A module that lets you set the input level of the comp module.
Explanation of NORMALIZE MODULE parameters
Parameter name
GAIN
-12 – 12
EQ MODULE
TYPE PARAMETER 1
HIGH
3BandEQ
Three-band equalizer.
*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.
ZNR MODULE
TYPE
ZNR
Zoom's proprietary noise reduction that minimizes noise when you are not playing.
*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.
VOL PDL MODULE
TYPE
VOL PDL
You can use an expression pedal to control the volume.
*For an explanation of the parameters, refer to the GUITAR/BASS algorithm.
DIMENSION/RESONANCE MODULE
TYPE PARAMETER 1
RISE_1
DIMENSN
DIMENSN An effect that produces spatial width.
DEPTH
RESONNC
RESONNC A resonance filter with LFO.
Explanation of DIMENSION/RESONANCE MODULE parameters
Parameter name
RISE_1
RISE_2
DEPTH
FreqOFST
RATE
TYPE HPF /LPF /bPF
RESO
EFX LVL
DRY LVL
104
PARAMETER 1
GAIN
Range
Specifies the gain.
PARAMETER 2 PARAMETER 3
MID
PARAMETER 1
THRSHOLD
PARAMETER 1
MIN VOL
PARAMETER 2 PARAMETER 3
RISE_2 --
FreqOFST RATE
Range
0 – 30 Specifies the degree to which the stereo component is emphasized.
0 – 30 Specifies the spaciousness that includes the mono component.
0 – 10 Specifies the depth of the effect.
1 – 30 Specifies the LFO offset.
1 – 30
Specifies the speed of the effect.
Specifies the type of filter.
1 – 30 Adds character to the effect.
0 – 30 Adjusts the mix amount of the effect sound.
0 – 30 Adjusts the mix amount of the direct sound.
Explanation of parameter
PARAMETER 4
LOW LEVEL
PARAMETER 4 PARAMETER 5
-- --
TYPE RESO
Explanation of parameter
PARAMETER 6 PARAMETER 7
-- --
EFX LVL DRY LVL
ZOOM MRS-1044