Maintenance - Vulcan-Hart CBFT Series Installation & Operation Manual

F-47102 (02-14) CBFT SERIES
PRESERVING & RESTORING:
Special stainless
cleaners can preserve and restore the
protective film.
Preserve the life of stainless steel with a
regular application of a high-quality
stainless steel polishing cleaner, as a
final step to daily cleaning.
If signs of breakdown appear, restore
the stainless steel surface.
thoroughly clean, rinse, and dry the
surface. Then, on a daily basis, apply a
high-quality stainless
according to manufacturer's instructions.
parts are HOT.
when operating,
servicing the cabinet.
electrical power supply before
servicing the cabinet.
Always perform the LOCKOUT / TAGOUT Procedure of your facility
before attempting to service this equipment.
The Lockout / Tagout Procedure is used to protect personnel working on an electrical
appliance. Before performing any type of maintenance or service on an electrically
operated appliance, follow these steps:
1. In electrical box, place unit's circuit breaker into OFF position.
2. Place a lock or other device on electrical box cover to prevent someone from
placing circuit breaker ON.
3. Place a tag on electrical box cover to indicate that unit has been disconnected for
service and power should not be restored until tag is removed by maintenance
personnel.
4. Disconnect unit power cord from electrical outlet.
5. Place a tag on cord to indicate that unit has been disconnected for service and
power should not be restored until tag is removed by maintenance personnel
steel polishing
First,
steel polish

MAINTENANCE

The cabinet and its
Be very careful
cleaning, or
Always unplug
LOCKOUT / TAGOUT PROCEDURE
HEAT TINT:
Darkened areas, called "heat tint," may
appear on stainless steel exposed to
excessive heat. Excessive heat causes
the protective film to thicken.
unsightly, but is not a sign of permanent
damage.
To remove heat tint, follow the routine
cleaning procedure. Stubborn heat tint
will require heavy-duty cleaning.
Beyond periodic inspections, checking
for frayed or damaged power cord, plug,
hinges, racks, and overall cabinet body,
there is little maintenance required. The
caster axles, however, should be kept
free of foreign objects such as mop
strings, plastic, etc. Depending on the
handling of the cabinet, the casters
should be greased at least quarterly. If
harsh detergents
frequent greasing will be required.
7
This is
are used, more