Table of Contents
Advertisement
3.1 ELECTRONIC CARDS
The state of the LEDs represents the communication between the 2 electronic cards and helps with diagnostics in the event of a breakdown.
Significance of the LEDs on the FastPAD 2 power assembly and the FastPAD screen card:
A flashing LED is considered active as is a steady one.
Diagnostic of electronic faults:
FastPAD
FastPAD 2 power
screen card
R
Y
G
R
G
R
R
G
FastPAD 2 power
assembly
F49572 (07-23)
3.
MAINTENANCE PROGRAMMES
LED Red ➔ ➔ ➔
LED yellow/Orange ➔
LED Green ➔ ➔ ➔
assembly
R
Y
G
- FastPad 2 Power assembly OK
- FastPad screen OK
- Supply failure
R
- Communication problem with the FastPAD
screen card
R
G
- FastPad 2 UC power card defective
R
- Screen not working
R
- Cable linking FastPAD screen to - FastPAD 2
power assembly
Page 9
Power on
Emitting
Receiving
Diagnostic
FastPAD 2 relay card
LED steady
LED steady or flashing
- Everything working normally
- Check the power between terminals 1 and
3 on the FastPad power assembly
- Replace the FastPAD screen card and/or
the interconnecting cable
- Replace the FastPAD 2 power assembly
- Replace the FastPAD screen card
- Replace the link cable between the cards
VULCAN
A division of ITW Food Equipment Group LLC
P.O. Box 696
Louisville, KY 40201
3VE490072EM – 06/23
Actions
Advertisement
Table of Contents
