Cleaning; Stainless Steel Care - Vulcan-Hart CBFT Series Installation & Operation Manual

F-47102 (02-14) CBFT SERIES
Always
ELECTRICAL POWER
before cleaning.
Keep the cabinet clean and sanitary so
it will meet your local sanitation code.
DO NOT USE
WATER OR STEAM
CABINET, FLOOD WITH WATER, OR
ALLOW ELECTRICAL
BECOME WET.
DAILY:
1. Unplug electrical power supply.
2. Allow cabinet to cool before

cleaning.

CLEANING:
Stainless Steel contains 70 – 80% iron,
which will rust if not properly maintained.
Stainless Steel also contains 12 – 30%
chromium, which forms an invisible
passive, protective film that shields
against corrosion.
If the protective film remains intact, the
stainless steel will
However, if the film is damaged, the
stainless steel can break down and rust.
PREVENTIVE CARE:
To prevent stainless steel break-
down, follow these steps:
1. Never use any metal tools,
scrapers, files, wire brushes,
or scouring pads (except for
CLEANING
UNPLUG
SUPPLY
HIGH PRESSURE
ON THE
PARTS TO

STAINLESS STEEL CARE

remain intact.
3. Clean the interior of the cabinet
with a mild soap and water.
Never use harsh chemicals or
abrasive pads to
4. Rinse and dry with a soft dry
cloth.
5. Clean the exterior of the cabinet
with a clean damp cloth.
HEAVY-DUTY CLEANING:
For heavy-duty cleaning, use warm
water, a degreaser, and a plastic,
stainless steel, or Scotch-Brite pad.
Never rub in a circular motion -- rub
gently in the direction of the steel grain.
Always rinse thoroughly.
stainless steel scouring pads,)
which will mar the surface.
2. Never use steel wool – which
will leave behind particles that will
rust.
3. Never
chloride containing cleaning
solutions – which
down the protective film.
4. Never rub in a circular motion.
Always rub gently in the direction
of the steel grain.
5. Never leave any food products
or salt on the surface.
foods are acidic.
chloride.
6
clean the cabinet.
use acid-based
will break
Many
Salt contains
or