Troubleshooting; Service & Parts Information - Vulcan-Hart CBFT Series Installation & Operation Manual

F-47102 (02-14) CBFT SERIES
.
SYMPTOMS
Cabinet not operating
GFCI or Ground Fault
Circuit Indicator tripped
Cabinet is connected to
power source, switch is ON,
circuit breaker is ON, but
cabinet is not heating.
Cabinet does not heat
properly
Fan not operating
To obtain Service and Parts information concerning this model, contact Vulcan-Hart
Service Department at the address listed on the front cover of this manual or refer to
our website: www.vulcanequipment.com
and Parts depots.

TROUBLESHOOTING

POSSIBLE CAUSES
Cabinet not connected to
power source.
ON/OFF switch not ON
No power.
Moisture problem.
Shorted element
Pinched/damaged wire.
Damaged power cord.
Defective: element,
thermometer, thermostat, etc.
Door not shut properly or
needs adjustment
Defective: element,
thermometer, thermostat,
thermostat requires adjustment
ON/OFF switch not ON
Defective fan.
SERVICE & PARTS INFORMATION
Customer Service
Technical Service
Service Parts
Connect cabinet to power source.
Turn ON/OFF switch ON
Check circuit breaker
Check GFCI
Dry moisture problem.
Contact Authorized Service Provider.
Contact Authorized Service Provider.
Contact Authorized Service Provider.
Contact Authorized Service Provider.
Check door seal and Contact
Authorized Service Provider.
Contact Authorized Service Provider.
Turn ON/OFF switch ON
Contact Authorized Service Provider.
for a complete listing of Authorized Service
1-800-814-2028
1-800-814-2028
1-800-814-2028
8
REMEDY