All Areas Off (Cmd 81); Auto-Forward On/Off (Cmd 82) - Bosch D621 User Manual

All Areas Off (Cmd 81)

Depending on the areas assigned to your authority level, this command allows you
to turn off all areas at the same time when the system is split into more than one
area.
1. Press [CMD] [8] [1]. The Command Center may prompt you to
enter a valid passcode by flashing the Cmd indicator.
2. Enter your passcode if necessary. The Command Center turns off all
areas at the same time.

Auto-Forward On/Off (Cmd 82)

This command allows you to turn on or off the auto-forward feature as necessary.
1. Press [CMD] [8] [2]. The Command Center may prompt you to
enter a valid passcode by flashing the Cmd indicator.
2. Enter your passcode if necessary. The Command Center sounds the
valid entry tone.
3. Press [1] to turn auto-forward on or press [2] to turn auto-forward
off.
• Point Indicator 1 On Solid: Auto-Forward ON (Point
Indicator 2 flashes)
• Point Indicator 2 On Solid: Auto-Forward OFF (Point
Indicator 1 flashes)
4. Press [CMD] to exit this command.
© 2003 Bosch Security Systems
D621 User's Guide
I can perform this command.
I cannot perform this command.
I can perform this command.
I cannot perform this command.
D621 User's Guide
Page 41 46840D