Sharp AR-6020V Service Manual page 95

4) Remove the paper exit tray.
5) Disconnect the harness of the LSU unit and the clamps.
6) Remove the screws fixing the LSU unit. Then, remove the LSU
unit.
Screw disused
TR No. : DCE-1028
From mid-June 2016 production
AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 12
NOTE: Instructions at the time of the installation.
a) Insert a hole of LSU in a positioning boss.
b) Fix the four screws on LSU.
c) Remove the LSU to LSU adjustment plate.
d) Tighten four screws.
*
Check that there is no space between
LSU and LSU adjustment plate.
*Screw disused
TR No. : DCE-1028
From mid-June 2016 production
Positioning boss