Sharp AR-6020V Service Manual page 102

2) Remove the harness of developer cartridge from the developer
cover.
3) Turn the MG roller to discharge developer.
4) Check that two hooks of the developer cover is hooked on the
toner cartridge guide, and secure the toner cartridge guide to
the developing unit. Then, tighten up the screws of the devel-
oper cover.
Hook
Check that the DV seal is free from the developer. If developer
is attached to the DV seal, clean it.
After supplying developer, do not tilt or shake the developer
cartridge.
AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 19
5) Connect the harness of developer cartridge to the developer
cover.
6) Attach the developer cartridge to the main unit, and secure it
with the screw.
(2) Toner filter unit
1) With the guide AS (cover) removed, replace it.
When replacing, clean the guide AS.
(3) DV side sheet F/ DV side sheet R
1) Remove the cartridge guide unit.