Sharp AR-6020V Service Manual page 62

Main Sub
Contents
code code
RSPF mode sub scanning magnification
48 05 ratio adjustment in copying
(Only when the RSPF is installed)
Flash ROM program writing mode
01
(MCU)
49
Flash ROM program writing mode
02
(NNB)
The current RSPF mode sub scan direction magnification ratio adjustment value is displayed. When the [START]
key is pressed, the entered value is acquired and saved into the EEPROM, and a copy is made. When the [CA] key
is pressed, the simulation mode is terminated.
In RSPF adjustment, after the machine enters the copy mode of one page, select the single copy mode with the
[ORIGINAL TO COPY] key to shift to the single copy mode, making two pages of single copy.
For printing, regardless of the AUTO/TEXT/PHOTO indicators and Light and Dark indicators display, the density
mode = TEXT, and density level = 3.
(Adjustment range: 1 ~ 99, Default: 50)
LED
AUTO indicator RSPF document surface magnification ratio adjustment
TEXT indicator RSPF document back magnification ratio adjustment
(Operating procedure)
When this simulation is executed, the [AUTO], the [TEXT] and the [PHOTO] indicators light and the program is
written to the EEPROM.
Use the writing tool on the PC to write the program. During writing, the display is made as follows. After completion
of downloading, turn OFF/ON the power to reset.
Status
Download data reception
Loader function transfer
Data delete start
Data write (Boot/Program
section)
Sum check
Download end
The program is written into the NNB by using the USB flash drive.
(Preliminary arrangement)
(1) Save the NNB download file to the root directory of the USB flash drive.
(2) Connect the USB flash drive to the USB port of the NNB.
(Operating procedure)
When this simulation is executed, the [ONLINE] key indicator and the [SCAN] key indicator light and the machine
enters the NNB download mode. The writing operation of the program is started to the NNB.
During writing, the display is as shown below. When upgrade of the firmware is completed, turn OFF/ON the power
to reset.
Status
Firmware upgrading
Firmware upgrading completed
Error status
AR-6020V SIMULATIONS 6-23
Details of operation
Adjustment mode
DATA NOTIFICATION indicator flashes, AUTO/TEXT/PHOTO indicator light
AUTO/TEXT/PHOTO indicator light
TEXT/PHOTO indicator light
PHOTO indicator lights
PHOTO indicator lights
AUTO/TEXT/PHOTO indicator flash
Value section
DATA NOTIFICATON LED flashes.
ONLINE key indicator and SCAN key indicator flash
Error indicator lights.
Default
53
52
LED