Sharp AR-6020V Service Manual page 45

Main Sub
Contents
code code
01 DVB setting and output
08
02 GB setting and output
08 06 Transfer setting and output
When this simulation mode is entered, the current setting value is displayed on the number of copies display part.
Select an output mode with the [AUTO/TEXT/PHOTO] key.
Enter the adjustment value by the [Numeric] keys and press the [AUTO/TEXT/PHOTO] key. Then, the adjustment
value is saved in the EEPROM.
When the [CA] key is pressed, the adjustment value is saved in the EEPROM and the simulation is terminated.
When the [START] key is pressed, the adjustment value is saved in the EEPROM and the test pattern is printed out
for 30 sec in the selected mode. To prevent wasting the toner, carry out the operational sequence of starting up and
shutting down of the process unit. At this moment, the polygon motor is also operated to perform the laser
discharge.
When the [CA] key is pressed, the simulation is terminated.
LED
AUTO indicator
TEXT indicator
PHOTO indicator
TEXT indicator & PHOTO indicator
When this simulation mode is entered, the current setting value is displayed on the number of copies display part.
Select an output mode with the [AUTO/TEXT/PHOTO] key.
Enter the adjustment value by the [Numeric] keys and press the [AUTO/TEXT/PHOTO] key. Then, the adjustment
value is saved in the EEPROM.
When the [CA] key is pressed, the adjustment value is saved in the EEPROM and the simulation is terminated.
When the [START] key is pressed, the adjustment value is saved in the EEPROM and the test pattern is printed out
for 30 sec in the selected mode. To prevent wasting the toner, carry out the operational sequence of starting up and
shutting down of the process unit. At this moment, the polygon motor is also operated to perform the laser
discharge.
When the [CA] key is pressed, the simulation is terminated.
LED
AUTO indicator
TEXT indicator
PHOTO indicator
TEXT indicator & PHOTO indicator
When this simulation mode is entered, the current setting value is displayed on the number of copies display part.
Select an output mode with the [Copy ratio] key.
Enter the adjustment value by the [Numeric] keys and press the [Copy ratio] key. Then, the adjustment value is
saved in the EEPROM.
When the [START] key is pressed, the adjustment value is saved in the EEPROM and the test pattern is output for
30 sec in the selected mode.
When the [INTERRUPT] key is pressed at that time,machine goes into the sub code input standby mode. When the
[CA] key is pressed ,the simulation mode is terminated.
No.
1 Plain Paper surface (Paper width ≥ 265mm)
2 Plain Paper back (Paper width ≥ 265mm)
3 Plain Paper surface (Paper width 265mm > & ≥ 185mm)
4 Plain Paper back (Paper width 265mm > & ≥ 185mm)
5 Plain Paper surface (Paper width 185mm >)
6 Plain Paper back (Paper width 185mm >)
7 Heavy Paper1 (Paper width ≥ 265mm)
8 Heavy Paper1 (Paper width 265mm > & ≥ 185mm)
9 Heavy Paper1 (Paper width 185mm >)
10 Heavy Paper2 (Paper width ≥ 265mm)
11 Heavy Paper2 (Paper width 265mm > & ≥ 185mm)
12 Heavy Paper2 (Paper width 185mm >)
13 OHP (Paper width ≥ 265mm)
14 OHP (Paper width 265mm > & ≥ 185mm)
15 OHP (Paper width 185mm >)
16 Envelop (Paper width ≥ 265mm)
17 Envelop (Paper width 265mm > & ≥ 185mm)
18 Envelop (Paper width 185mm >)
19 Thin paper (Paper width ≥ 265mm)
20 Thin paper (Paper width 265mm > & ≥ 185mm)
21 Thin paper (Paper width 185mm >)
22 Label
23 Label (Paper width 265mm > & ≥ 185mm)
24 Label (Paper width 185mm >)
25 Post card
26 TC Absorption process
27 TC paper interval
28 TC Front edge [%]
29 TC rear edge surface [%]
30 TC rear edge back [%]
AR-6020V SIMULATIONS 6-6
Details of operation
Output mode Setting range
COPY 0 - 650
COPY-TSON 0 - 650
PRINTER 0 - 650
PRINTER - TSON 0 - 650
Output mode Setting range
COPY 0 - 750
COPY-TSON 0 - 750
PRINTER 0 - 750
PRINTER - TSON 0 - 750
Contents
Default
400
320
400
400
Default
540
460
540
540
Default Range
14 5 - 35
12 5 - 35
16 5 - 35
14 5 - 35
19 5 - 35
19 5 - 35
10 5 - 35
12 5 - 35
15 5 - 35
10 5 - 35
12 5 - 35
15 5 - 35
5 - 35
9
10 5 - 35
10 5 - 35
10 5 - 35
12 5 - 35
15 5 - 35
10 5 - 35
12 5 - 35
15 5 - 35
10 5 - 35
12 5 - 35
15 5 - 35
16 5 - 35
10 5 - 35
5 5 - 35
100 0 - 100
60 0 - 100
60 0 - 100