Sharp AR-6020V Service Manual page 58

Main Sub
Contents
code code
10 Process control data display 2
44
11 Process control data display 3
12 Process control data display 4
When this simulation is executed, the current code number is displayed on the number of copies display.
Switching can be made with [Copy ratio] keys.
When the negative value is displayed, the [Developer replacement required] indicator lights.
No. Contents
1 Laser power default value (CP) (TSOFF)
2 Laser power default value (PRT) (TSOFF)
3 Corrected laser power default value (CP) (TSOFF)
4 Corrected laser power default value (PRT) (TSOFF)
5 Laser power default value (CP) (TSON)
6 Laser power default value (PRT) (TSON)
7 Corrected laser power default value (CP) (TSON)
8 Corrected laser power default value (PRT) (TSON)
9 Dissolution laser power correction value (CP)
10 Dissolution laser power correction value (PRT)
11 Environmental laser power correction value (CP)
12 Environmental laser power correction value (PRT)
When the [INTERRUPT] key is pressed at that time, the machine goes into the sub code input standby mode.
When the [CA] key is pressed, the simulation mode is terminated.
When this simulation is executed, the current code number is displayed on the number of copies display.
Switching can be made with [Copy ratio] keys.
No. Contents
1 Temperature/humidity area for toner control
2 Temperature AD value for toner control
3 Humidity AD value for toner control
4 Temperature AD value for transfer printing
5 Humidity AD value for transfer printing
6 Temperature/humidity area for transfer printing
When the [INTERRUPT] key is pressed at that time, the machine goes into the sub code input standby mode.
When the [CA] key is pressed, the simulation mode is terminated.
When this simulation is executed, the current code number is displayed on the number of copies display.
Switching can be made with [Copy ratio] keys.
No. Contents
1 Dissolution drum travel distance area
2 Developer life area for process unit
3 Environmental correction area
4 Duplex printing counter
5 Laser power area
6 Laser power environmental area
8 Machine model type
When the [INTERRUPT] key is pressed at that time, the machine goes into the sub code input standby mode.
When the [CA] key is pressed, the simulation mode is terminated.
AR-6020V SIMULATIONS 6-19
Details of operation
Setting Display
- O
- O
- O
- O
- O
- O
- O
- O
- O
- O
- O
- O
Setting Display
- O
- O
- O
- O
- O
- O
Setting Display
- O
- O
- O
- O
- O
- O
- O
Range Default
0 - 255 112
0 - 255 112
0 - 255 112
0 - 255 112
0 - 255 112
0 - 255 112
0 - 255 112
0 - 255 112
-127 - 127 0
-127 - 127 0
-127 - 127 0
-127 - 127 0
Range Default
1 - 8 8
0 - 1023 466
0 - 1023 7
0 - 1023 0
0 - 1023 0
1 - 8 8
Range Default
1 - 15 0
0 - 15 0
1 - 8 8
0 - 300 8
0 - 15 0
0 - 8 7
0 - 1 0