Sharp AR-6020V Service Manual page 49

：
Main Sub
Contents
code code
25 04 Toner adjustment value display
02 Size setting
26
03 Auditor setting
When this mode is executed, the toner adjustment value and the setting values are displayed on the number of
copies display. By pressing the [Copy ratio] key, the setting is changed in order. When the negative value is
displayed, the [Developer replacement required indicator lights.
No. Contents
1 ATC sensor
2 Toner control standard value (Correction value is included.)
3 Auto developer adjustment value
4 All correction standard value
5 Life correction value
6 Environmental correction value
7 Duplex correction value
8 Printing rate correction value
9 Area correction value
10 Area for Auto developer adjustment
11 Current area
When this mode is executed, the current setting values are displayed
When [START] key is pressed, the settings are written to the EEPROM and the machine goes into the sub code
input standby mode.
Code number Mode
0 Inch-1
1 Inch-2
2 Inch-3
3 AB-1
4 AB-2
5 AB-3
6 AB-4
7 AB-5
No. Contents
1 Document/paper size type setting
2 RSPF Document/paper size type setting
3 Exclusion(1) setting
Enable/Disable setting of FC (8.5" x 13") size detection and Mexican legal size detection.
Press [Density Select] key to change over the lighting lamp, and enter the code number to set the document size
detection.
LED Code number
AUTO indicator 0
AUTO indicator 1
TEXT indicator 0
TEXT indicator 1
Detection size when FC (8.5" x 13") and Mexican legal size documents are used.
Unit to be
Destination
used
EX Japan
AB series
(FC)
Document RSPF
Inch series
(FC)
* For the other destinations, this setting is disabled.
Used to set the auditor.
Code number
0
1
2
* When the coin vendor mode is selected, if the auditor setup is ON and the default tray is bypass tray, the
default tray setup must be changed to the 1st tray.
AR-6020V SIMULATIONS 6-10
Details of operation
Setting
-
-
-
-
-
-
-
-
-
-
-
Setting Display Range
- O 0 - 3
- O 0 - 7
- O 0 - 3
FC detection disable
(The following set values indicated with
(Follow the setting marked with
Mexican legal detection disable (FC detection enable)
Mexican legal detection enable (FC detection disable)
When the AUTO
Document size
indicator is
turned on: 0
FC (8.5" x 13") B4
B4 B4
FC (8.5" x 13") LG (8.5" x 14")
LG (8.5" x 14") LG (8.5" x 14")
Mode
Built-in auditor mode (Default)
Coin vendor mode
Other
Display Range
O 0 - 255
O 0 - 255
O 0 - 255
O 0 - 255
O -128 - 127
O -128 - 127
O -128 - 127
O -128 - 127
O -128 - 127
O 0 - 8
O 0 - 8
Note
0 : Inch-1/ 1:AB-A/ 2:AB-B/ 3:AB-C
0 : Inch-1/ 1:Inch-2/ 2:Inch-3/ 3:AB-1/ 4:AB-
2/ 5:AB-3/ 6:AB-4/ 7:AB-5
0 :8.5x14/ 1:8.5x13.5/ 2:8.5x13.4/ 3:8.5x13
00 : Don't care
Setting
are ignored.)
.)
Detection size
When the AUTO indicator is turned
on: 1
When the TEXT When the TEXT
indicator is indicator is
turned on: 0 turned on: 1
Mexican legal
FC (8.5" x 13")
(8.5" x 13.4")
Mexican legal
FC (8.5" x 13")
(8.5" x 13.4")
Mexican legal
FC (8.5" x 13")
(8.5" x 13.4")
Mexican legal
FC (8.5" x 13")
(8.5" x 13.4")