Table of Contents
Advertisement
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
64 –
Glass, Window Regulators
1
Description and Operation
⇒ "1.1 Flush-Bonded Windows", page 190
⇒ "1.2 Bolted Windows", page 193
1.1
Flush-Bonded Windows
⇒ "1.1.1 Windshield Assembly Overview - Coupe ", page 190
⇒ "1.1.2 Windshield Assembly Overview - Roadster", page 191
⇒ "1.1.3 Side Window Assembly Overview", page 192
⇒ "1.1.4 Rear Window Assembly Overview", page 192
1.1.1
Windshield Assembly Overview - Coupe
1 - Windshield
❑ Distance to roof dimen‐
sion -a- = 2 mm.
❑ Even out side distance
dimension -c- = 3 mm.
2 - Adhesive sealing material
❑ Observe minimum cur‐
ing time
⇒ page 197
❑ Apply adhesive directly
near window molding or
lower molding.
•
Dimension -d- = 8 mm
mm
•
Dimension -e- = 23 mm
mm
3 - Molding
❑ To remove, pull off of
window edge.
❑ Before installing, com‐
pletely remove adhe‐
sive residue from mold‐
ing using a window
scraper.
❑ Cut adhesive bead back
from window adhesive
but do not remove com‐
pletely.
❑ Clean adhesive surface
with Cleaning Solution -
D 009 401 04- .
Caution
Do not apply any bond‐
ing agents to the cut ad‐
hesive bead.
❑ Apply Bonding Agent -D 009 200 02- to adhesive surface and let dry 10 minutes.
190
Rep. Gr.64 - Glass, Window Regulators
.
+/- 2
+/- 2
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Advertisement
Table of Contents
