Bracket, Disengaging At Main Bearing - Audi TT 207 Repair Manual

2.1.5

Bracket, Disengaging at Main Bearing

Disengaging
1 - Main bearing
2 - Bracket
❑ To remove, press secur‐
ing spring sideways off
pins and remove brack‐
et sideways.
3 - Securing spring
❑ To install, slide on side‐
ways as far as stop.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
123