Table of Contents
Advertisement
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
– Rotate the spoiler center part.
– Clean all surfaces that will later be in contact with double-sided
adhesive tape with cleaning solution -D 009 401 04- .
– Attach film -1- and double-sided adhesive tape -3 through 6-
to spoiler center part -2- as shown in the figure.
– Rotate the spoiler center part with the upper part.
– Adhere ring-shaped films -arrows- to the attachment points.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove all protective films of the double-sided adhesive tape
and attach spoiler center part -1- via centering aids -2- to
spoiler upper part -3-.
– Manually press the parts firmly together.
– Coat the screws including the collar with locking compound -
D 000 006- and screw them in partially at the locations indi‐
cated by -arrows-.
– Tighten the screws from the inside to the outside. Remove the
centering aids for this purpose.
244
Rep. Gr.66 - Exterior Equipment
Advertisement
Table of Contents
