D V P - E S 3 S e r i e s O p e r a t i o n Ma n u a l
Additional remark
You create a contact and a coil by typing simple instructions. Refer to the description below. The instructions
typed are not case-sensitive.
To Insert a normally-open contact (contact A), type "A <device address>"
To insert a normally-closed contact (contact B), type "B <device address>"
_6
To insert an output coil (OUT), type "O <device address>"
Basic Editing ─ Selecting a Network and Operation
6.5.4
Before you select an object in a network, press Esc on the keyboard, or click
on the toolbar. After the
cursor appears as a small arrow, click the object in the network. The basic selection shows below.
6 - 1 4