Characteristics - Delta DVP-ES3 Series Operation Manual

D V P - E S 3 S e r i e s O p e r a t i o n Ma n u a l

1.3 Characteristics

_1
Characteristics of the DVP-ES3 Series CPU module:
(1) High efficiency
 The DVP-ES3 Series CPU module uses a 32-bit high-speed processor. The module executes basic
instructions at 25 ns each and moving instructions at 150 ns each. The module executes instructions
at a speed of 40k steps/ms (40% of the instructions are basic instructions, and 60% of the instructions
are applied instructions).
 The CPU of the DVP-ES3 Series uses the Soc architecture, built with 4 high speed counters. The
maximum frequency is 200 kHz for each counter; four-axis (8 points) high speed position output at
200 kHz.
(2) Supporting more inputs and outputs
 The DVP-ES3 Series CPU module supports up to 256 digital I/Os (inputs + outputs) or 8 analog I/O
modules.
(3) Larger program capacity and memory
 The AS300 Series advanced CPU modules have 64k steps of program capacity. 60000 general
registers (30000 for specific use and 30000 for programming editing), and 64k words of memory (that
can be used for storing parameters).
(4) Supporting IEC 61131-3
 The DVP-ES3 Series CPU module supports IEC 61131-3.
 Supported programming languages are ladder diagrams (LD), sequential function chart (SFC),
structured text (ST), and continuous function chart (CFC, available for ISPSoft V3.01 or later)
 You can select a programming language according to your preference. Programming languages
support one another so that programs written by different users are compatible.
1 - 8