D V P - E S 3 S e r i e s O p e r a t i o n Ma n u a l
The output mapping areas are D25000-D25999, and the input mapping areas are D24000-D24999, as the
following table shows.
Device in the PLC
D25000–D25031
D24000–D24031
D25032–D25978
D24032–D24978
If a DVP-ES3 Series functions as a slave, the output mapping areas are D25032–25063, and the input
mapping areas are D24032–24063 as the following table shows.
Device in the PLC
D24032~24063
D25032~25063
10.2
This section introduces the physical dimensions of DVP-ES3 Series PLC, the HWCONFIG settings, the CAN
interface, the CANopen network framework, and the maximum communication distance.
10.2.1 The Dimensions of DVP-ES3 Series PLC
_10
1 0 - 4
SDO request information, NMT service information, and
Emergency request information
SDO reply information, and Emergency reply information
RxPDO mapping area
TxPDO mapping area
RxPDO mapping area
TxPDO mapping area
Installation and Network Topology
L1
L
Mapping area
Mapping area
Unit: mm
Mapping length
64 bytes
64 bytes
1894 bytes
1894 bytes
Mapping length
64 bytes
64 bytes
61.5
78