16: Usb Memory; 17: Capture Image - Roland XS-62S Reference Manual

Menu List

16: USB MEMORY

Menu item Value
(bold text: default value)
LOAD PRESET (ENTER)
SAVE PRESET (ENTER)
SAVE AS PRESET (ENTER)
STILL IMAGE 1
LOAD STILL IMAGE
STILL IMAGE 2
STILL IMAGE 1
SAVE STILL IMAGE
STILL IMAGE 2
FORMAT
(EXEC)

17: CAPTURE IMAGE

Menu item Value
CAPTURE SOURCE INPUT
STILL IMAGE 1
TARGET STORAGE NO
STILL IMAGE 2
CAPTURE EXECUTE
(EXEC)
DISABLE,
CAPTURE SHORTCUT
18
Explanation
The USB LOAD screen appears.
This loads a settings file (.X62) that is on the USB flash drive into the unit.
The USB SAVE screen appears.
This saves settings, overwriting the selected settings file (.X62) on the USB flash drive.
The USB SAVE AS screen appears.
This newly saves the unit's settings to the USB flash drive as a single file (.X62).
* Any still images that have been imported into the unit are not saved in the file.
When you are importing a still image that is on a USB flash drive, this specifies the memory
to use as the destination for saving the image on the unit. Pressing the [VALUE] knob lets you
import the still image.
* A " " symbol is displayed for memory where a still image is already saved.
File format of the still images that can be loaded
Format
Resolution
File name
Press the [VALUE] knob to access the SAVE STILL IMAGE screen.
The still image captured from the input/output video is exported to a USB flash drive.
* A " " symbol is displayed for memory where a still image is saved.
* The file formats of the still images that can be saved are the same as in "File format of the still
images that can be loaded, " above.
This formats the USB flash drive.
Explanation
(bold text: default value)
1–6, PROGRAM
This specifies the input video to use for still-image capture.
This selects the memory to use as the destination for saving the captured still image.
* A " " symbol is displayed for memory where a still image is already saved.
This captures a still image.
* Capture is not possible if the [FREEZE] button is on.
Enables (ENABLE) or disables (DISABLE) still image capture by button operations. If this is
set to "ENABLE, " you can capture a still image by long-pressing a cross-point [1]–[6] button.
* Capture by button operations is possible only when the [SW MODE] button is lit orange.
ENABLE
Save-destination for still image
Operate the upper row of cross-point buttons:
Operate the lower row of cross-point buttons:
Bitmap file (.bmp), 24-bit color, uncompressed
PNG file (.png), 24-bit color
* Alpha channel is not supported.
JPG file (.jpg), 24-bit color
In conformity with system format
Up to eight single-byte alphanumeric characters
* The extension ".bmp, " ".png, " or ".jpg" must be added.
STILL IMAGE 1
STILL IMAGE 2