Menu List; 1: Video Input - Roland XS-62S Reference Manual

Menu List

Pressing the [MENU] button makes the menu appear on the built-in display. If the HDMI OUT 3 connector's OUTPUT ASSIGN (p. 4) is set to "MULTI-
VIEW, " the OSD menu appears.
Built-in display (Menu)
MEMO
5 By turning the [VALUE] knob while pressing it, you can change the
value more greatly.
5 Pressing and holding the [VALUE] knob returns the current menu
item you're setting to its default value.

1: VIDEO INPUT

Menu item Value
SDI IN 1–4
INPUT STATUS (ENTER)
OFF, ON
H FLIP
BRIGHTNESS
-64–0–63
CONTRAST -64–0–63
SATURATION -64–0–63
HDMI IN 5
INPUT STATUS (ENTER)
FLICKER FILTER OFF, ON
ZOOM 10.0–100 .0–1000.0%
This sets the scaling type.
FULL
LETTERBOX
SCALING TYPE
CROP
DOT BY DOT
MANUAL
MANUAL SIZE H (*2) -2000–0–2000
MANUAL SIZE V (*2)
-2000–0–2000
POSITION H -1920–0–1920
POSITION V -1200–0–1200
H FLIP OFF, ON
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION
-64–0–63
RED -64–0–63
GREEN -64–0–63
BLUE -64–0–63
INTERNAL, 800 x 600, 1024 x 768,
1200 x 800, 1366 x 768, 1280 x 1024,
EDID
1400 x 1050, 1600 x 1200, 1920 x 1200,
720p, 1080i, 1080p
(*1) The range of this value varies according to conditions such as the input/output format.
(*2) This is available when "SCALING TYPE" is set to "MANUAL. "
2
(bold text: default value)
(*1)
(*1)
(*1)
(*1)
(*1)
Multi-view monitor (OSD menu)
Explanation
This displays information about the incoming video (video format, size, etc.).
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This displays information about the incoming video (video format, size, presence or
absence of an HDCP signal, etc.).
Setting this to "ON" reduces flicker.
This adjusts the zoom ratio.
This always displays the picture expanded to full screen, irrespective of the aspect
ratio of the input video.
This enlarges or reduces the incoming video to a full-screen view while keeping the
aspect ratio unchanged.
This enlarges or reduces the incoming video so that the output picture has no
blank margins while keeping the aspect ratio unchanged. Video extending beyond
the borders is cut off.
This performs no scaling.
Scale according to the "MANUAL SIZE H" and "MANUAL SIZE V" settings below.
This adjusts the horizontal size.
This adjusts the vertical size.
This adjusts the display position in the horizontal direction.
This adjusts the display position in the vertical direction.
Setting this to "ON" flips the output video horizontally.
This adjusts the brightness.
This adjusts the contrast.
This adjusts the saturation.
This adjusts the red level.
This adjusts the green level.
This adjusts the blue level.
This sets the input format (EDID) for the HDMI IN 5 connector.